MEEN20050 Heat Transfer

Academic Year 2023/2024

The module give an introduction to heat transfer with a focus on conduction and convection. It builds upon aspects of Stage 1 MEEN10050 Energy Engineering. Radiative heat transfer is not considered in the current module, instead it is treated later in MEEN40010 Thermodynamics III.

The indicative syllabus is as outlined below.

Revision of the fundamentals of heat transfer including applications involving conduction and convection.

Conduction: Conduction Equation. 1-D steady state conduction in plane walls and cylinders. Thermal resistance, thermal resistance networks, U-values, the composite wall and cylinder. Fin heat transfer.

Heat Exchangers: Types of heat exchanger, U value and resistance analysis. Log-mean temperature difference method. NTU-effectiveness method.

Convection: Forced convection. External convection. Internal convection. Free convection

Laboratories: Fin Analysis and Heat Exchanger Analysis.

All laboratory activities are carried out with due regard to the School's Health and Safety protocols. Students should follow these during all laboratory activities, including wearing a laboratory coat, and relevant PPE when required. Further information is available at https://intranet.ucd.ie/smme/index.html and within the Brightspace resources for this module.

During laboratory activities students will work in small teams to complete defined experimental activities where teamwork and collaboration is paramount.

Student are encouraged to make reference to the course text: Heat and Mass Transfer. Y.A. Cengel. McGraw Hill. Any edition should suffice, the current edition details are as follows: Heat and Mass Transfer: Fundamentals and Applications
6th Edition, By Yunus Cengel and Afshin Ghajar, ISBN10: 0073398195, ISBN13: 9780073398198, (2020).

Supplementary Reading: Fundamentals of Heat and Mass Transfer: Incropera F.P. and DeWitt, D.P. Prentice Hall. Any edition.

Students should note the UCD Alternative Linear Conversion Grade Scale is used for this module. For further details see:
https://www.ucd.ie/registry/staff/registryservices/assessment/examsandgrading/gradingguide/

Show/hide contentOpenClose All

Curricular information is subject to change

Learning Outcomes:

On completion of this module students should be able to:
1. Demonstrate an understanding of the basic principles of heat transfer by applying the equations governing steady state heat conduction, convection and radiation to thermal problems.
2. Be able to solve 1-dimensional, steady state heat transfer problems involving convection and conduction through composite walls and pipes.
3. Analyse finned surfaces used to augment convection heat transfer.
4. Utilise experimental correlations in the analysis of convection heat transfer problems.
5. Analyse heat exchanger performance.
6. Understand the role of heat transfer in engineering applications.

Indicative Module Content:

Conduction: Conduction Equation. 1-D steady state conduction in plane walls and cylinders. Thermal resistance, thermal resistance networks, U-value, the composite wall and cylinder. Fin heat transfer.

Heat Exchangers: Types of Heat Exchanger, U value and Resistance Analysis. Log-mean temperature difference method. NTU-effectiveness method.

Convection: Forced Convection. External Convection. Internal Convection. Free Convection

Student Effort Hours: 
Student Effort Type Hours
Lectures

36
Tutorial

4
Practical

6
Autonomous Student Learning

60
Total

106
Approaches to Teaching and Learning:
Lectures, Assignments, Tutorials, Laboratories. 
Requirements, Exclusions and Recommendations
Learning Requirements:

MEEN10050 Energy Engineering


Module Requisites and Incompatibles
Not applicable to this module.
 
Assessment Strategy  
Description Timing Open Book Exam Component Scale Must Pass Component % of Final Grade
Lab Report: Laboratory Activities Varies over the Trimester n/a Graded No

20
Continuous Assessment: Assessment 1: Varies over the Trimester n/a Alternative linear conversion grade scale 40% No

10
Continuous Assessment: Assessment 2: Varies over the Trimester n/a Alternative linear conversion grade scale 40% No

10
Examination: End of trimester examination 2 hour End of Trimester Exam No Alternative linear conversion grade scale 40% No

60

Carry forward of passed components
Yes
 
Resit In Terminal Exam
Spring No
Please see Student Jargon Buster for more information about remediation types and timing. 
Feedback Strategy/Strategies

• Group/class feedback, post-assessment

How will my Feedback be Delivered?

Not yet recorded.

Heat and Mass Transfer: Fundamentals and Applications
by Yunus A. Cengel Dr. (Author), Afshin J. Ghajar (Author)
ISBN-13: 978-0073398181
ISBN-10: 0073398187
Name Role
Lefki Chaniotaki Tutor
Sadaf Dalirazar Tutor
Mr Federico Mazzanti Tutor
Seyed Masih Mousavizadeh Tutor
Divyanshu Sood Tutor
XinHui Wang Tutor
Chenhua Zhang Tutor
Timetabling information is displayed only for guidance purposes, relates to the current Academic Year only and is subject to change.
 
Autumn
      
Lecture Offering 1 Week(s) - Autumn: All Weeks Fri 10:00 - 10:50
Lecture Offering 1 Week(s) - 1, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12 Mon 09:00 - 09:50
Tutorial Offering 1 Week(s) - 4, 6, 9, 12 Tues 17:00 - 17:50
Lecture Offering 1 Week(s) - Autumn: All Weeks Wed 09:00 - 09:50
Laboratory Offering 1 Week(s) - 3, 9 Thurs 15:00 - 16:50
Laboratory Offering 2 Week(s) - 4, 8 Thurs 15:00 - 16:50
Laboratory Offering 3 Week(s) - 5, 11 Thurs 15:00 - 16:50
Laboratory Offering 4 Week(s) - 6, 10 Thurs 15:00 - 16:50
Laboratory Offering 5 Week(s) - 3, 9 Fri 11:00 - 12:50
Laboratory Offering 6 Week(s) - 4, 8 Fri 11:00 - 12:50
Laboratory Offering 7 Week(s) - 5, 11 Fri 11:00 - 12:50
Laboratory Offering 8 Week(s) - 6, 10 Fri 11:00 - 12:50
Laboratory Offering 9 Week(s) - 3, 10 Wed 15:00 - 16:50
Laboratory Offering 10 Week(s) - 4, 8 Wed 15:00 - 16:50
Laboratory Offering 11 Week(s) - 5, 9 Wed 15:00 - 16:50
Laboratory Offering 12 Week(s) - 6, 11 Wed 15:00 - 16:50
Laboratory Offering 13 Week(s) - 3, 9 Tues 15:00 - 16:50
Laboratory Offering 14 Week(s) - 4, 10 Tues 15:00 - 16:50
Laboratory Offering 15 Week(s) - 5, 11 Tues 15:00 - 16:50
Laboratory Offering 16 Week(s) - 6, 12 Tues 15:00 - 16:50
Autumn