Explore UCD

UCD Home >

CHEN30010

Academic Year 2026/2027

Chemical & Bioprocess Reaction Engineering (CHEN30010)

Subject:
Chemical Engineering
College:
Engineering & Architecture
School:
Chem & Bioprocess Engineering
Level:
3 (Degree)
Credits:
5
Module Coordinator:
Assoc Professor Steven Ferguson
Trimester:
Autumn
Mode of Delivery:
On Campus
Internship Module:
No
How will I be graded?
Letter grades

Curricular information is subject to change.

To develop the skills needed in the design of batch, semi-batch and continuous chemical and biochemical reactors for homogenous and heterogeneous systems under isothermal and non-isothermal conditions.

Course Content
1. Introduction to Chemical & Bioprocess Reaction Engineering
2. Kinetics, fractional conversion, rate expressions for generalised isothermal and non-isothermal reaction kinetics, constant and non-constant density systems.
3. The design of isothermal batch, semi-batch, stirred reactors, continuous stirred tank and plug-flow ideal reactors.
4. Multiple reactor configurations (e.g. series and parallel connections) and plug-flow with recycle reactor design.
5. Multiple reactions (Series, Parallel, Series Parallel and complex reaction networks).
6. Non-ideal reactor design and residence time distribution characterisation of real reactors. RTDs for CSTR, PFR, Laminar flow and selected reactor configurations. Modelling real reactor systems.
7. Micro mixing and segregation.
8. Mass transfer limited reactions.
9. Design of Non Isothermal Reaction/Reactor systems.
10. Synthesising these elements through holistic reaction and real reactor simulation project.

About this Module

Learning Outcomes:

On completion of this module students should be able to,

1. Develop rate expressions for constant density and variable density isothermal and non-isothermal reacting homogenous systems.
2. Apply steady state and unsteady state material and energy balances to homogenous, single and multiple reaction systems.
3. Design batch, semi-batch and continuous homogenous, isothermal and chemical reactors.
4. Explain the concept of the use of residence time distributions in reaction engineering and to incorporate the effects of mixing on the design of real reactors using appropriate model reactor systems.
5. Formulate the design of reactors for heterogeneous gas/liquid and fluid/solid non-catalytic and catalytic reacting systems.
6. Identify the significant Safety, Health and Environment implications of certain types of reactions and reactor systems.
7. Solve complex reaction engineering problems using Excel, Matlab and other tools to prepare technical reports describing the solutions to selected problems.

The United Nations identified seventeen Sustainable Development Goals (SDGs) as core to the 2030 Agenda for Sustainable Development, and UCD contributes in general to SDG 4 Quality Education. Further SDGs explored within this module if relevant are listed below. A scale of 1 - 5 indicates the extent to which the SDG is covered.


 

Student Effort Hours:
Student Effort Type Hours
Autonomous Student Learning

80

Lectures

36

Tutorial

6

Total

122


Approaches to Teaching and Learning:
Lectures are used to outline the theory and practice of Chemical and Bioprocess Reaction Engineering with associated example problems to illustrate how these principles are applied to develop and optimise chemical reactions in a systematic and quantitative manner. There is a strong focus on problem based learning in the course with significant problem sets with solutions provided for all relevant parts of the course. This focus on problem solving is aligned with the assessment strategy where example problem sets form the basis for mid-term examination and a holistic project that brings together each of the elements of the course within an experiential project representative of cutting edge methods in research and industrial R&D environments.

Requirements, Exclusions and Recommendations

Not applicable to this module.


Module Requisites and Incompatibles
Not applicable to this module.
 

Assessment Strategy
Description Timing Component Scale Must Pass Component % of Final Grade Component repeat (in-module) Offered
Group Work Assignment: Simulation and optimisation of real reaction engineering and/or reactor design challenge from industrial/research R&D Week 12 Graded No
25
No
Exam (In-person): Class Test: Midterm exam based on Course Problem sets Week 6, Week 10 Standard conversion grade scale 40% No
15
No
Exam (In-person): Final Examination. All material within the course is examinable. End of trimester
Duration:
2 hr(s)
Standard conversion grade scale 40% No
60
No

As part of UCD's student support, under the Additional Consideration policy, extensions may be available for the following assessments in the module: Assignment (including essay/poster), Portfolio, Reflective Assignment, Report(s), and Individual Project.


Carry forward of passed components
No
 

Resit In Terminal Exam
Spring Yes - 2 Hour
Please see Student Jargon Buster for more information about remediation types and timing. 

Feedback Strategy/Strategies

• Group/class feedback, post-assessment
• Peer review activities
• Self-assessment activities

How will my Feedback be Delivered?

Mid-term group based feedback will be provided post exam. Final exam grades will be provided for post-assessment of terminal exam performance. Ungraded feedback based on project performance throughout the project based on feedback sessions.

1. Levenspiel, O., “Chemical Reaction Engineering”, 3rd Edition, Wiley, 1996.
3. Scott-Fogler, H, “Elements of Chemical Reaction Engineering”, 3rd Edition, Prentice Hall International Series, 1999.
3.. Schmidt, Lanny D., “The Engineering of Chemical Reactions”, 2nd Edition, Oxford University Press, 2005.

Name Role
Dr Abdullah Jassim A Al Abdulghani Lecturer / Co-Lecturer
Professor Joe Hannon Lecturer / Co-Lecturer

Timetabling information is displayed only for guidance purposes, relates to the current Academic Year only and is subject to change.
Autumn Tutorial Offering 1 Week(s) - Autumn: Even Weeks Thurs 13:00 - 13:50
Autumn Lecture Offering 1 Week(s) - Autumn: All Weeks Wed 09:00 - 11:50